4. Press Dial key , left softkey “Call”, # (Use # as dial key” must be configured in web
configuration) to initiate the call or wait for 4 seconds and the call will be initiated automatically.
5. To terminate the call, press Hang-Up key .
During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing
operation by pressing the on-hook key. During the call conversations, you can press the left and right
navigation keys to adjust the volume. The call duration is displayed on the LCD screen while the call is
in progress and call summary will be displayed once the call is terminated.
Notes:
• To dial “+” please keep pressing “0” key for about 2 seconds.
• To dial from contacts list, choose a contact using navigation keys and press Dial key .
• When having un-read voicemails on the WP820, once accessing the dialing interface a stutter tone
will be heard to notify users about voicemails that need to be read.
• The maximum length of dialed digits is limited to 30 characters.
Dialing from Call history
Users may use their call history entries to initiate calls. Please refer to following steps:
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Call History.
3. Select the desired entry and press Dial key to establish the call.
Figure 47: Dialing from Call History
Note: In step 3, users can press “Options” softkey followed by “Edit before Dialing” option to edit the
number before initiating the call. The call history list stores the last dialed phone numbers. When the
memory of the redial number list is full, the handset will automatically erase oldest dialed number when a
new number is dialed.
To Next Page
Loading...
Need help?
General
