WR1000-UM-251–01–9380 3 – 10
3. DISASSEMBLY AND REASSEMBLY
NOTE
When attaching the LCD protective plate to the LCD, be sure to attach it to the position shown below.
The shaded area represents the area to be covered by Nitoflon tape No. 903UL with a 0.08-mm thick-
ness, 15-mm width, and 10-m length (manufactured by NITTO).
Fig. 3-3-12
CAUTION
Ensure that no dust or other foreign matter enters between the LCD protective plate and the panel
surface of the LCD.
LCD protective
plate assembly
LCD (TFT)
To Next Page
Loading...