GW Instek GDS-2000 Series - Page 74

GDS-2000 Series User Manual
74
Max
(marked as waveform “A” in
thd display) Maximum
boundary: RefA, W1 ~ 20
internal memory
Min
(marked as waveform “B” in
the display) Minimum
boundary: RefB, W1 ~ 20
internal memory
8. Press F3 (Position). Use the
Variable knob to move the
waveform amplitude level.
Position
3.00 Div
F 3
9. Repeat step 9, 10, 11 for the
other template setting, Min
or Max.
Template
Min
F 1
10. When the templates are set,
press F4 (Save & Create) to
save them.
Save &
Create
F 4