Preface
The H3C S7500E Series Ethernet Switches Installation Manual guides you through the installation of your
switch. It covers product overview, preparing for installation, installing the switch, installing modules,
setting up an IRF virtual device, connecting your switch to the network, hardware management and
maintenance, troubleshooting, replacement procedures, hardware specifications, pluggable module
ordering guide, LEDs, cables, cabling recommendations, and a compliance and safety manual.
This preface includes:
• Audience
• Conventions
• About the H3C S7500E documentation set
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the S7500E series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.
To Next Page
Loading...
Need help?
General
