Hardi ALPHA EVO II EcoDrive User Manual

7 - Repair
207
4. Press the button (2) to scroll the first digit.
5.
Press the button (6) to move the cursor to the 2nd digit.
6. Press the button (4), le message «U2» is displayed briefly, then signal from control unit is displayed
7.
Press and hold the button (5) to get the minimum track. Measure and note the value (V).
8. Press the button (4), the message «d2» appear briefly
9. Press the button (2) to scroll the first digit.
10.
Press the button (6) to move the cursor to the 2nd digit.
11. Press the button (4) to exit the calibration menu.

Hardi ALPHA EVO II EcoDrive Specifications

General

Brand	Hardi
Model	ALPHA EVO II EcoDrive
Category	Farm Equipment
Language	English