safely as possible, and to avoid collisions.
How to use
B4C5DCCA8D8A
〉
When the ignition switch is in ON mode or the vehicle is started, the anti-collision radar
can be opened or closed by pressing the button.
〉
Switch to the gear R and the anti-collision radar will automatically turn on.
〉
When the R gear is engaged, the AVM will be turned off automatically.
〉
If the moving speed exceeds 15 km/h, the anti-collision radar will be automatically stop-
ped.
Detection scope and alarm mode
Sensor position Detection scope [m]
Front on both sides 0.6
Front center 1.0
Rear on both sides 0.6
Rear center 1.5
Notice
Due to different vehicle configurations, some vehicles may not be equipped with a front
central radar sensor, so the actual vehicle shall prevail.
After the anti-collision radar is started, if the sensor identifies obstacles within the detec-
tion range, it will start to give an alarm.
When the distance between the vehicle and the obstacle reduces, the frequency of alarm
sounds will gradually increase. When the distance between the obstacle and the vehicle
is within about 0.3m, the alarm sound will be heard for a long time, and the vehicle shall
110
2
Driving
To Next Page
Loading...
