High/low beam auto switch
07B558A834B1
High and low beam auto switch function
can automatically switch high and low
beam lights based on current vehicle
speed and ambient brightness.
When the low beam headlamp is on and
the high beam headlamp is off, press the
switch to turn on or off the high/low
beam auto switch function. After the func-
tion is turned on, the high/low beam auto
switch indicator on the combination in-
strument turns on and displays in green.
Warning
High/low beam auto switch function is only
an auxiliary function. When traffic condi-
tions or weather conditions require, the
driver should manually switch the high and
low beam according to the light and visibil-
ity conditions. Manual intervention is re-
quired if:
〉
Weather conditions are not conducive to
driving, such as heavy fog or rain or
snow.
〉
Turning sharply or driving on the slope.
〉
You are at a junction or you cannot see
the opposite traffic completely, such as
when the light of the opposite traffic is
obscured by a collision barrier or when
you are traveling on highway.
〉
Driving in areas with poor lighting condi-
tions and many buildings.
〉
There are traffic participants with poor
lighting around the road, such as pedes-
trians or non-motorized vehicles.
〉
There are highly reflective objects near
the road, such as traffic signs.
〉
The rainfall and light sensor on the cur-
rent windshield is dirty, frost or covered
by labels.
Emergency flashers
4F9697F1369D
In the event of vehicle failure or traffic acci-
dent, turn on the emergency flashers to re-
mind other vehicles.
Press the switch to turn on or turn off the
emergency flashers.
Daytime running lamps
In order to allow other drivers to see your
vehicle more clearly, the daytime running
lamps automatically light up when the
52
1
Operation
To Next Page
Loading...
