Vehicle equipment
Please note that this manual contains all
the standard equipment, country-specific
equipment and special equipment for this
model series. Thus, some equipment or
features described in this manual may not
be installed onto your vehicle or are only
available in some markets. For the further
configuration information, please refer to
relevant sales information or consult with
your distributor selling the vehicle to you.
Front wiper
Front wiper position
275CCCA3323B
Ⓐ Front wiper mist operation (MIST)
Pull the wiper control combination
switch upwards to the MIST position.
Once released, the lever will automati-
cally return to its original position. The
front wipers will operate once.
Ⓑ Front wiper off (OFF)
Ⓒ Automatic (AUTO)
Ⓓ Low speed (LO)
Ⓔ High speed wiping (HI)
Caution
〉
If the surface of the windshield glass is
dirty or attached with any foreign object
(snow, gum, etc.), please clean it first
and remove the foreign object, otherwise
the wiper blade or the internal structure
of the wiper may be damaged.
〉
Prior to using the wiper in the cold sea-
son, you shall ensure to check if the wip-
er blade is frozen on the windshield
glass. If the wiper blade has been frozen
on the windshield, you shall use it after
unfreezing, otherwise the wiper blade
and wiper motor may be damaged.
〉
Should the wiper stop working due to is-
sues such as accumulated snow, please
turn off the wiper and park the vehicle in
a safe spot. Then remove accumulated
debris so that the wiper may continue to
operate normally.
Adjustment of auto wiping fre-
quency
4C411A8EFC4D
Wiper control
55
1
Operation
To Next Page
Loading...
