Lamp settings
The light settings can be made through the multimedia display screen.
3B8C52BA1B21
〉
Tap the 【power saving delay time setting】 button to set the delay effective time of the
power saving function.
After the ignition switch is turned to the LOCK position, if the state of the ignition switch
and the door lock does not change within the set time, the power saving function will be
activated automatically to save power.
〉
Tap the 【roof light timing】 button to set the delay time for the interior lamps to go out
after all doors are closed when the interior lamps are on due to the door control func-
tion.
〉
Tap the 【leaving light timing】 button to set the continuous lighting time of the position
lamp and the low beam headlamp after the “follow-me-home” function is triggered.
〉
Tap the 【find car mode】 button to set the vehicle prompt status when the “vehicle lo-
cating” function is triggered.
49
1
Operation
To Next Page
Loading...
Need help?
General
