Vehicle equipment
Please note that this manual contains all the standard equipment, country-specific equip-
ment and special equipment for this model series. Thus, some equipment or features de-
scribed in this manual may not be installed onto your vehicle or are only available in
some markets. For the further configuration information, please refer to relevant sales in-
formation or consult with your distributor selling the vehicle to you.
Tips for safety
Notice
The radar detection device of parking assist system is affected by ultrasonic characteris-
tics. Incapability or poor detection may be caused under the following circumstances,
which are not system failures:
〉
The obstacles are tiny objects such as barbed wire, fence, post and rope.
〉
When the surface of the obstacle does not reflect detection signals and the obstacle is
a person wearing such clothes.
〉
When the obstacle is snow, cotton or other substances of which the surface can easily
absorb sound waves.
〉
When the obstacle is an acute-angle reflector or cone shaped;
〉
When driving through grass or over rough terrain.
〉
The driver reverses the vehicle on a slope.
〉
There are ultrasonic noises with the same frequency around, such as metal noise, high-
pressure gas emission noise, and horn sensor buzzing.
〉
The license plate is bent or tilted, or a large license plate decorative frame is installed.
〉
sundries on the transducers.
In order to ensure the normal operation of the system, the sensor must be kept clean
and free of snow and ice.
Anti-collision radar
System introduction
The anti-collision radar is a radar-detection device. When the user is parking the vehicle,
the sensor installed will work to detect any obstacles that are present in front of or behind
the vehicle, as well as the distance between the vehicle and that obstacle. The system
will provide the driver with audio prompts to help the driver reverse or park as easily and
Parking assist system
109
2
Driving
To Next Page
Loading...