circulation mode has been turned on.
When the external circulation indicator light is on, it indicates that the external cir-
culation mode has been turned on. In this case, the air outside the vehicle can be intro-
duced into the vehicle.
Notice
〉
Normally, you should put the system in external circulation mode. Use of internal circu-
lation mode tends to cause foggy windows, especially when the compressor is turned
off.
〉
The internal circulation mode should be used under such circumstances as the tunnel,
traffic jam, dirty air outside the vehicle or quick cooling and heating desired.
〉
Tap the more air conditioner settings button to pop up the A/C comfort setting inter-
face.
A/C comfort setting interface
On the A/C setting interface, tap the more settings button to pop up the A/C comfort
setting interface.
A42C56437B98
On the A/C comfort setting interface, you can set the following items:
〉
Turn on or off the automatic air quality control function. When this function is enabled,
the air conditioning system will automatically detect the air quality and automatically
switch between the internal and external circulation modes.
〉
Turn on or off the anion purification function. When the function is enabled, the negative
ions generated by the air conditioning system will circulate with the air in the vehicle,
which can effectively purify the air and increase comfort.
62
1
Operation
To Next Page
Loading...
