Instrument control
Control button
25B23C4B098E
Ⓐ Home button
Ⓑ Back button
Ⓒ Switch button
Ⓓ OK button
Shield alarm messages
Press back button to shield the alarm
messages currently shown.
Press and hold the back button to shield
all alarm messages.
Notice
When alarm message exists on the instru-
ment interface, it should be shielded first.
Otherwise, other control functions of the
instrument cannot be used.
View audio media information
Press the left or right button until the
trip computer switches to the audio media
interface. In this case, you can view the
music or radio information that is currently
playing.
View BT phone information
Press the left or right button until the
trip computer switches to the BT phone in-
terface. In the BT phone interface, the fol-
lowing operations can be achieved.
〉
Press the up or down button to
view the call record entry of BT phones
item by item.
〉
Press the OK button to make a call to
the currently selected call record entry.
View the driving data information
Press the left
or right button until the
trip computer switches to the driving data
interface.
Press the home button to directly return
to the driving data interface. In the driving
data interface, the following operations
can be achieved.
〉
Press the home button to directly re-
turn to the home page of the driving data
interface.
〉
Press the up switch or down
switch button to check the driving data
message page by page.
〉
Press and hold the OK button to bring
up the secondary menu interface. In the
secondary menu interface, you can view
the alarm message, set the alarm speed
and reset the travel information.
Press back button to return to the pre-
vious-level interface.
153
2
Driving
To Next Page
Loading...
