BD8755231D9A
Warning
The power safety switch can only be used
during vehicle repair and high-voltage rela-
ted operation.
How to operate
17A6A16A6B1D
1. Pull up the clip to release the plug lock-
ing device.
2. The circuit can be turned off by press-
ing the plug locking device and pulling
it up until the lock hole appears visual-
ly.
3. Install a padlock locking plug on the
lock hole, to prevent unnecessary in-
jury caused by misoperation.
Warning
The padlock keys shall be kept by special
personnel. Otherwise, serious personal in-
jury or death may occur.
Emergency cut-off point
The emergency cut-off point is located at
the front of the compartment fuse box.
When a vehicle collision causes serious
deformation of the luggage area and
makes it impossible to operate the battery
safety switch, a low-voltage wire harness
cut-off point is set to ensure personnel
safety and smooth implementation of
emergency rescue.
All harnesses of the emergency cut-off
point are wrapped with adhesive tape and
attached with emergency cut-off signs.
Emergency cut-off sign
DD512F2B9979
In case of emergency cut-off, it is necessa-
ry to cut the low-voltage wire harness at
an interval of 2~3 times within the effective
range. Cutting the wire harness only once
will easily lead to secondary reconnection
of the wire harness, resulting in serious
personal injury.
91
2
Driving
To Next Page
Loading...
