Light control combination
switch
Main lighting switch
Notice
Before you lock and leave the vehicle,
please turn the main lamp knob to the
OFF or AUTO position to reduce the pow-
er consumption of the vehicle and prevent
the loss of battery power from affecting the
normal use of the vehicle.
D0F97216C02B
〉
Turn the main lamp knob to the clear-
ance lamp position
to turn on the
position lamp and the license plate lamp.
Caution
Do not use the position lamp to replace
the low beam headlamp in the driving.
Otherwise, there is a risk of an acci-
dent.
The position lamps are not bright enough
to illuminate the road in front of the vehicle
or allow other vehicles and pedestrians to
see the vehicle. Therefore, turn on the low
beam headlamp when the weather is dim
or visibility is poor.
〉
Turn the main lamp knob to the low
beam headlamp position to turn on
the low beam headlamp and keep the
position lamp and the license plate lamp
illuminated.
〉
Turn the knob of the main lamp knob to
the AUTO position. The clearance lamps
and low beam headlamps will be turned
on or off automatically according to the
brightness of the surrounding environ-
ment.
Caution
〉
When visibility is affected in the day due
to fog, the lamps may not light up auto-
matically. Please turn on the lamps man-
ually in this case.
〉
Automatic light control can only assist
the driver. At all times the driver should
be responsible for the lighting of the ve-
hicle.
〉
Turn the main lamp knob to the OFF po-
sition to turn off all vehicle lamps.
Fog lamp switch
D9AA17A1B508
〉
When the clearance lamps (position
lamp, license plate lamp) are
50
1
Operation
To Next Page
Loading...
