ventilation.
It is recommended to turn off the air con-
ditioning compressor (A/C), keep the
blower to vent for 3 - 5 minutes before
the A/C system is shut down so that the
A/C system may be dry to prevent mold
breeding.
When you feel the smell is very strong, it
is recommended to head to service pro-
vider for check, and clean or replace the
air conditioning filter if necessary.
Vent
Front vents
60CD37E89602
Ⓐ Front center vent
Ⓑ Side defroster vent
Ⓒ Side vent
By turning the slats at the center of the
vent, adjust the direction of air flow.
Slide the slats as indicated by the left-to-
close marking or right-to-close
marking to the limit position to close
the air vent.
Rear vents
E2A227E42A4A
By turning the slats at the center of the
vent, adjust the direction of air flow.
Slide the slats as indicated by the left-to-
close marking or right-to-close
marking
to the limit position to close
the air vent.
65
1
Operation