Vehicle equipment
Please note that this manual contains all
the standard equipment, country-specific
equipment and special equipment for this
model series. Thus, some equipment or
features described in this manual may not
be installed onto your vehicle or are only
available in some markets. For the further
configuration information, please refer to
relevant sales information or consult with
your distributor selling the vehicle to you.
Automatic anti-glare inside
rearview mirror
0CD5669561F6
Ⓐ Indicator
Ⓑ Switch
Turn the ignition switch to ON mode and
then automatic anti-glare function is de-
faulted to be in ON status. Press the
switch, and you can turn on or turn off the
automatic anti-glare function.
If the indicator is on, it means that the au-
tomatic anti-glare function is on and the in-
side rearview mirror will automatically re-
duce the reflection according to the light
intensity of the headlamp of the vehicle
behind.
Outside rearview mirror ad-
justment
6D1FFA8D70DA
Ⓐ Left outside rearview mirror selection
button
Ⓑ Right outside rearview mirror selection
button
Ⓒ Mirror adjustment button
Mirror adjustment
1. Press the outside rearview mirror se-
lection button to select the left (L) or
right (R) outside rearview mirror. If the
button indicator lights up, it indicates
that the mirror has entered the selected
state.
2. Press the front, rear, left and right posi-
tions of mirror adjustment button to ad-
just the angle of the left or right outside
rearview mirrors.
3. After the adjustment, press the outside
rearview mirror selection button again,
the button indicator will go out and the
mirror exits the selected state.
Warning
Do not adjust the rearview mirrors while
driving. Otherwise, errors in control can
Rearview mirror
43
1
Operation
To Next Page
Loading...
Need help?
General
