will flash.
When the right turn signal lamp
is on, the right turn signal indica-
tor will flash.
When the emergency flashers
are on, the turn signal indicator
and all external turn signal lamps
will flash in unison.
Caution
When the turn signal indicator
flashes quickly, it usually means
that the turn signal lamp has
been damaged. Replace it as
soon as possible. Otherwise,
other drivers on the road will not
be able to see your turn signals.
Light on indicator
It illuminates to indicate that the
main lighting switch is ON.
Position indicator
It illuminates to indicate that the
position lamp and the license-
plate lamp are ON.
High beam indicator
It illuminates to indicate that the
high beam headlamp is ON.
Indicator for automatic switch-
ing of high and low beams
This indicator illuminates in
green to indicate that the auto-
matic switching function of high
and low beams is enabled.
This indicator illuminates in
yellow to indicate that the auto-
matic switching function of high
and low beams failed. In this
case, please manually turn on
the high beam headlamp or low
beam headlamp as needed, and
drive the vehicle to service pro-
vider for inspection and repair as
soon as possible.
Front fog lamp indicator
It illuminates to indicate that the
front fog lamp is ON.
Rear fog lamp indicator
It illuminates to indicate that the
rear fog lamp is ON.
Seat belt unfastened warning
lamp
It illuminates to indicate that the
driver, the front passenger or the
rear passenger hasn't fastened
the seat belt.
Vehicle door not closed warn-
ing lamp
It illuminates to indicate that the
door or the engine hood is open
or not fully closed.
Warning lamp for airbag faults
It illuminates to indicate that
there is a malfunction in airbag
system. In this case, go to serv-
ice provider as soon as possible
for maintenance.
155
2
Driving
To Next Page
Loading...
