1. Open the tow hook cover.
58BACF6D1312
In the gap at the tow hook cover, pry
down the cover using a flathead screw-
driver or other similar tools wrapped by
the cloth.
2. Screw the tow hook clockwise into the
hole and tighten it to ensure that it is
securely installed.
50E346432F72
3. Attach the rope to the tow hook, taking
care not to damage the body.
The distance between the towing vehi-
cle and towed vehicle should be be-
tween 4 and 10 meters
Attach a piece of white cloth (0.3 m X
0.3 m above) in the middle of the tow-
ing rope.
Caution
Do not use a steel rope to tow as that will
damage the bumper.
4. Turn on the emergency flashers, start
the vehicle, and start towing.
Caution
〉
Prohibit the towing of a vehicle with a
weight greater than this vehicle, other-
wise the vehicle is likely to be damaged.
〉
Avoid sudden start or unstable driving
operation, otherwise the tow hook or the
towing rope will be subject to too much
tension.
〉
When driving downslope for an exten-
ded time, please don't use a rope to tow
the vehicle.
〉
Do not tow the vehicle backward.
220
5
Emergency
To Next Page
Loading...
