Notice
〉
This function is not applicable to all mobile phones, but only to mobile phones that have
passed the "Qi" official standard certification and can be normally placed in the charg-
ing area.
〉
Only one mobile phone can be charged at a time.
〉
On bumpy roads, intermittent stopping and resuming of wireless charging may occur. If
the mobile phone deviates from the charging area and stops charging, it is necessary to
move the mobile phone back to the chargeable area.
〉
It is normal that wireless charging devices and mobile phones will get hot during charg-
ing.
When the temperature is too high, the system will stop charging, and will continue
charging after the temperature drops.
〉
If the phone breaks down, it may also cause failure to charge. Other mobile phones that
meet the requirements can be used for wireless charging detection to confirm whether
the mobile phone is faulty.
〉
If the mobile phone is equipped with protective covers or accessories that do not sup-
port wireless charging, they shall be removed first; otherwise, the phone cannot be
charged normally.
〉
To prevent the battery from losing power, do not use the wireless charging function for a
long time when the vehicle is not started.
Warning
〉
For the sake of safety, drivers shall not perform charging related operations during driv-
ing.
〉
Please do not place coins, keys, chip cards and other metal objects in the charging
area. Otherwise, metal objects may be heated, which may lead to abnormal charging or
cause safety accidents.
If metal foreign objects are found in the charging area during charging, please do not
remove them by hand immediately to avoid scalding your fingers. Turn off the wireless
charging function immediately, and wait a few minutes before removing foreign objects.
〉
If you need to use the charging area as a storage box, please turn off the wireless
charging function.
67
1
Operation
To Next Page
Loading...
