Network Video Recorder User Manual
26
In PTZ control settings, press this button
followed by a numeric button to call a PTZ
preset.
It is also used to turn audio on/off in the
Playback mode.
The button is used to enter the Playback
mode.
It is also used to auto scan in the PTZ control
menu.
Zoom in the PTZ camera in the PTZ control
setting.
Adjust focus in the PTZ Control menu.
It is also used to switch between input
methods (upper and lower case alphabet,
symbols and numeric input).
Edit text fields. When editing text fields, it l
also deletes the character in front of the
cursor.
On checkbox fields, press the button to check
the checkbox.
In PTZ control mode, the button adjusts the
iris of the camera.
In Playback mode, it can be used to generate
video clips for backup.
Enter/exit the folder of USB device and eSATA
HDD.
Switch between main and spot output.
In PTZ control mode, it can be used to zoom
out the image.
To Next Page
Loading...
Need help?
General
