Network Video Recorder User Manual
80
Figure 7-1 Add NAS Disk
Step 7 Select the NAS disk from the list shown below, or manually enter the directory in the NetHDD
Directory text field.
Step 8 Click the OK to complete the adding of the NAS disk.
Result:
After successfully adding the NAS disk, return to the HDD Information menu. The added NetHDD
will be displayed in the list.
Adding an IP SAN
Step 1 Go to Storage > Storage Device.
Step 2 Click Add to enter the Custom Add interface.
Step 3 Select NetHDD from the drop-down list.
Step 4 Select the type to IP SAN.
Step 5 Enter the NetHDD IP address in the text field.
Step 6 Click Search to search the available IP SAN disks.
Step 7 Select the IP SAN disk from the list.
Step 8 Click OK to complete adding IP SAN disk.
To Next Page
Loading...
Need help?
General
