HIMA H41q User Manual

F 5220 (0625)
267
Figure 2: Lead marking cable plug
Lead marking cable plug
Type A cable plug Z 7152 / 5220 / C.. / PU5 / P2 (for 5 V)
Type B cable plug Z 7152 / 5220 / C.. / PU24 / P2 (for 24 V)
Type C cable plug Z 7152 / 5220 / C.. / PSW / P2 (for prox. switches)
The cable plug type A for 5 V and type B for 24 V are different in the resistance assembling.
The cable plug for 5 V
may not be used for 24 V signals.
Channel Connection Color Color Color
Type A Type B Type C
Counter1
prox.sw.
z10
d10
WH
BN
Counter1
24V/5VDC
d22
L- d22
WH
BN
WH
BN
Direct. 1
prox.sw.
z14
d14
GN
YE
Direct. 1
24V/5VDC
d26
L- d26
GN
YE
GN
YE
Output 1 d6
z6
BK
VT
BK
VT
BK
VT
Counter2
prox.sw.
z12
d12
GY
PK
Counter2
24V/5VDC
d24
L- d24
GY
PK
GY
PK
Direct. 2
prox.sw.
z16
d16
BU
RD
Direct. 2
24V/5VDC
d28
L- d28
BU
RD
BU
RD
Output 2 d8
z8
GYPK
RDBU
GYPK
RDBU
GYPK
RDBU
L+
L-
z18
z2
RD
BK
RD
BK
RD
BK
Cable
shield
YEGN YEGN YEGN
The module must only be operated with forced ventilation (fan).
The fan (K 9203) must be installed above the subrack where the
F 5220 module is plugged in.
If the F 5220 module is operated in an H 41q, the fan (K 9212) must be
installed directly under the F 5220 module.
In order to ensure the forced ventilation, the air deflector panel M 7201
(1 HE) must to be mounted over the fan (K 9203) or over the kit H 41q.
The air deflector panel M 7201 deflects the warm air to the rear, in
order to avoid a temperature rise of the subracks and modules which
are mounted above.
Cable
LiYCY
6 x 2 x 0.5 mm
2
screened
l = 120 mm
q = 2.5 mm
2
Flat pin plug 6.3 x 0.8 mm, to be
connected to the earth bar under
the slot
q = 1 mm
2
l = 750 mm
Flat pin plug
2.8 x 0.8 mm
2

HIMA H41q Specifications

General

Brand	HIMA
Model	H41q
Category	Industrial Equipment
Language	English