Fig. 109. Zoom In button
The Zoom Out button decreases the magnification of the profile. Minimum magnification
is the entire sheet width.
Fig. 110. Zoom Out button
To activate:
1. Drag the yellow cursor to the position across the profile to be examined in more
detail. The slice number updates in the top right corner of the display.
2. Each press of ZOOM (+) zooms the profile in around the chosen position. The
maximum resolution is down to +/- one slice position.
3. By pressing ZOOM (-), the profile can be zoomed back out to the full width profile.
6.6.5 Freeze Button
Fig. 111. Profile Freeze button
Fig. 112. Profile Frozen
This feature freezes the profile at a known point in time.
When the Freeze button is pressed, that button shows the word Frozen with the current
time displayed in yellow on the profile.
The profile line changes to yellow at the time the profile is frozen, and the existing profile
continues to be updated in either red or green (depending on whether it is in or out of
limits).
To unfreeze the profile, click on the Freeze button again and the yellow frozen profile
disappears.
To Next Page
Loading...
