ii HC900 Process & Safety Controller User and Installation Manual Revision 6
21 April 2017
Notices and Trademarks
Copyright 2017 by Honeywell
Revision 6, 21 April 2017
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact
your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole
remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and
fitness for a particular purpose. Specifications may change without notice. The information we supply is believed
to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the application.
Honeywell Process Solutions
1250 W Sam Houston Pkwy S
Houston, TX 77042
Honeywell is a U.S. registered trademark of Honeywell
Other brand or product names are trademarks of their respective owners.
To Next Page
Loading...
Need help?
General
