Honeywell HC900 User And Installation Manual

Revision 6 HC900 Process & Safety Controller User and Installation Manual iii
21 April 2017
About This Document
Abstract
This document provides descriptions and procedures for the installation, operation and maintenance of the HC900
Process Controller hardware.
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
Document Title
ID #
HC900 Process Controller Technical Overview Specification
51-52-03-31
HC900 Module Specification
51-52-03-41
HC900 Controlware Specification
51-52-03-42
Designer Software Specification
51-52-03-43
Legacy HC900 Process Controller Installation and User Guide
51-52-25-107
HC900 Process Controller Operator Interface User Guide
51-52-25-108
HC900 Designer Software User Guide
51-52-25-110
HC900 Process Control Utilities User Guide
51-52-25-126
HC900 Process Controller Function Block Reference Guide
51-52-25-109
HC900 Process Controller Communications User Guide
51-52-25-111
HC900 Controller Redundancy Overview & System Operation
51-52-25-133
900 Control Station For use with HC900 Process Controller
51-52-25-148
Station Designer Software manual
51-52-25-149
HC900 Process & Safety Controller Safety Manual
51-52-25-153

Honeywell HC900 Specifications

General

Series	HC900
Redundancy	Optional
Programming Language	Function Block Diagram, Ladder Logic, Structured Text
Inputs	Analog, Digital
Outputs	Analog, Digital, Relay
Display	Optional
Control	PID, Advanced Control
Power Supply	24V DC or 100-240V AC
Storage Temperature	-40°C to 85°C
Humidity	5% to 95% non-condensing
Communication Protocols	Modbus, Ethernet