www.honeywell.com/security
118 | HRGX DVR User Manual
6. If you want to change the HDD property, under HDD Property, select one of the following
settings:
7. In the Group area, select a group number for the HDD group.
8. Click Apply to save your settings, click Yes to confirm, and then click OK to close the
window.
•R/W
Read/write. The default setting.
•Read-only
When the HDD is set to read-only, the recorded files are not
overwritten when the HDD becomes full in overwrite
recording mode.
• Redundancy
When the HDD is set to redundancy, video can be recorded
both onto the redundancy HDD and the R/W HDD
simultaneously for additional security and reliability.
To Next Page
Loading...
Need help?
General