www.honeywell.com/security
124 | HRGX DVR User Manual
2. Under OSD Configuration, configure the following settings:
3. To adjust the location of the OSD text on the screen, using your mouse, drag the
highlighted text boxes to the desired locations on the preview window. The date/time text
box is highlighted yellow; the camera name text box is highlighted red.
4. To copy these settings to one or more additional cameras, click Copy to open the Copy to
window, select the camera(s) you want to copy the settings to, or click Analog to copy the
settings to all cameras, and then click OK.
5. Click Apply to save your settings.
To restore the default OSD settings:
•In Menu > Camera > OSD, click Restore.
•Camera
Select the camera you want to configure OSD settings for by
clicking a number from the drop-down list.
• Camera Name
If you want, you can enter a descriptive name for the camera
(for example, "Front Door" instead of "Camera 01").
•Display Name
To display the camera name on screen, select the check box.
To hide the camera name, clear the check box.
•Display Date
To display the date on screen, select the check box.
To hide the date, clear the check box.
• Display Week
To display the day of the week on screen, select the check box.
To hide the day of the week, clear the check box.
• Date Format
Select format you want the date to be displayed in:
YYYY-MM-DD
,
MM-DD-YYYY
, or
DD-MM-YYYY
format.
•Time Format
Select the format you want the time to be displayed in:
24-hour
or
12-hour
format.
•Display Mode
Select one of the following display modes:
Transparent & Flashing
,
Transparent & Not Flashing
,
Non-Transparent & Flashing
, or
Non-Transparent & Not
Flashing
.
To Next Page
Loading...
Need help?
General