Recording Video | 61
800-16694 - A - 04/2014
4. Configure the following settings:
5. To copy these settings to one or more additional cameras, click Copy to open the Copy to
window, select the camera(s) you want to copy the settings to, or click Analog to copy the
settings to all cameras, and then click OK.
6. Click Apply to save your settings.
Note
To restore the current substream settings to the default parameters, click
Restore
.
•Pre-record
Sets the time to record before a scheduled recording time or
event.
•Post-record
Sets the time to record after a scheduled recording time or
event.
•Expired Time (day)
The expired time is the longest time a record file can be kept
in the HDD. After this, the file is deleted. If the expired time is
set to 0, the file will not be deleted. The actual keeping time
for the file should be determined by the capacity of the HDD.
• Redundant Record
This option is only available when the HDD storage mode is
set to
Group
. Select this check box to simultaneously save
recorded video to the redundant HDD. See
Configuring
Redundant Recording, page 63
.
• Record Audio
Select the check box to record video with sound. Clear the
check box to record video without sound.
• Enable 960Mode
Select the check box to enable encoding at WD1 resolution.
Clear the check box to disable it.
To Next Page
Loading...
Need help?
General