Recording Video | 65
800-16694 - A - 04/2014
4. Click Search. The Search result window opens, displaying a list of search results.
5. Select the video file(s) that you want to lock, and then click the Lock button.
To set the HDD property to read-only:
1. Go to Menu > HDD > General.
2. Under HDD Information, select the HDD you want to edit, and then click the Edit
button to open the Local HDD Settings window.
3. Click Read-only, click Apply to save the setting, and then click OK.
Note If you want to save files to the HDD, change the property to R/W. If there is only
one HDD and it is set to Read-only, the device will not record any files. Only live
view mode will be available. If you set the HDD to Read-only while the device is
saving files, the filed will be saved to the next R/W HDD or, if there is only one
HDD, recording will stop.
To Next Page
Loading...
Need help?
General