Configuring Alarm Settings | 93
800-16694 - A - 04/2014
a. Under Arming Schedule, you can set up to eight time periods per day (the time
periods cannot repeat or overlap). To copy the arming schedule to other days of the
week, click Copy. Click Apply to save your settings.
b. Click the Handling tab to set the action(s) you want to occur when video tampering is
detected. Select the check box corresponding to the action(s) you want to enable,
click Apply to save your settings, and then click OK to close the window.
5. Drag the Sensitivity slider to set the desired sensitivity level (3 levels configurable).
6. To copy these settings to one or more additional channels, click Copy to open the Copy
to window, select the channel(s) you want to copy the settings to, or click Analog to copy
the settings to all channels, and then click OK.
7. Click Apply to save your settings.
To Next Page
Loading...
Need help?
General