Honeywell Vibrex 2000 User Manual

Quick Reference Guide
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
xv
 Enter the number of blades to be tracked and observe the
targets.
Enhanced Vibrex 2000 Plus
 Press the TRACK context key.
 Insure that the proper helicopter model is selected.
 Press the STROBEX context key.
 Enter the number of blades to be tracked (if incorrect) and
observe the targets.
FasTrak
®
(EV2K+ Helicopter Only)
 Install the magnetic pickup, FasTrak
®
and mounting bracket.
Connect the magnetic pickup to MAG PU A. Connect the
FasTrak
®
to MAG PU B.
 Power up the Vibrex unit.
 Press the TRACK & BALANCE context key from the Main
Menu screen.
 Operate the aircraft in the desired condition.
 Press the TRACK context key.
 Insure that the proper helicopter model is selected.
 Press the FasTrak context key.
 Press the START key twice to acquire and observe the track
readings.
 Press the START key to obtain a solution.
Printing
 Connect the Vibrex unit to the printer using the appropriate
serial interface cable.
 Power up the Vibrex unit and select PRINT.
 Select the reading or reading set wanted to print then press
START or PRINT.

Honeywell Vibrex 2000 Specifications

General

Brand	Honeywell
Model	Vibrex 2000
Category	Test Equipment
Language	English