Another advantage of using the main menu print is that
all types of logs are available to print there.
Pressing the “0” key while powering up the unit with
the ON OFF key will clear out the entire memory
including user-entered chart coefficients and selections.
Use this function only as a last resort. The main
menu REVIEW/CLEAR should be used during normal
clearing of logs. If you do use this function, you should
always download the Status Log by using the PRINT
key inside of the main STATUS menu. If the unit
software has crashed, the Status Log may contain
useful information about the problem. Also, your <AC
CHARTS> should be printed if you saved any auto-
corrections or user entered balance charts.
To Next Page
Loading...
