Honeywell Vibrex 2000 User Manual

Chapter 3 – Getting Started
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
48
Printing Propeller Run Results - The user has the following
choices under the PRINT PROP RUNS context key:
<CURRENT RUN> Prints the latest run stored to memory.
<CURRENT SESSION> Prints all the runs, adjustments, and
sensitivities for the latest propeller
balance run in memory.
<ALL RUNS> Prints all propeller balance runs stored
to memory.
<LOGBOOK> Prints the log book entry for the
current session. The log book entry
may only be printed if the DONE key
was pressed after a last balance
measurement, confirming a good
balance.
Printing Balance Measurements - The user has the
following choices under the PRINT BALANCE MEAS context
key:
<CURRENT MEAS> Prints the latest measurement stored to
memory.
<ALL MEAS> Prints all propeller balance runs stored
to memory.
Printing Spectrum Measurements - The user has the
following choices under the PRINT SPECTRUM soft key:
<CURRENT LIST> Prints the latest measurement stored
to memory.
<ALL LISTS> Prints all spectrum lists stored to

Honeywell Vibrex 2000 Specifications

General

Brand	Honeywell
Model	Vibrex 2000
Category	Test Equipment
Language	English