Chapter 3 – Getting Started
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
50
Printing Helicopter Balance Run Results (EV2K+ Heli
Only) - The user has the following choices under the
TYPE<HELICPTR RUNS> context key:
<CURRENT RUN> Prints the latest run stored to memory.
<CURRENT SESSION> Prints all the runs and adjustments for
the latest helicopter balance job in
memory.
<ALL RUNS> Prints all helicopter balance runs
stored to memory.
Printing Aircraft (AC) Charts (EV2K+ Only) - The user
modified balance charts are printed as soon as the PRINT context
key is pressed. These charts are specific to a given model,
component, regime, change type and sensor direction. Only
charts specifically modified by the user (whether by hand editing
or auto-correction) are printed.
CAUTION: It is strongly recommended that if a user modifies
the factory charts, that this print function is used to record the
results in the event that the EV2K+ batteries are changed or
otherwise losses internal memory.
Printing Helicopter FasTrak
®
Results (EV2K+ Heli
Only) - The user has the following choices under the
TYPE<FASTRAK> context key:
<CURRENT RUN> Prints the latest run stored to memory.
<CURRENT SESSION> Prints all the runs and adjustments for
the latest FasTrak
®
tracking session in
memory.
To Next Page
Loading...
Need help?
General
