4-20 Display Codes
INIT C600 Retrieving the default console path
INIT C601 Get graphics console path
INIT C602 Get keyboard console path
INIT C603 Get mfg SS console path
INIT C640 Initialize default console path
INIT C641 Initialize graphics console
INIT C642 Initialize keyboard console
INIT C643 Initialize the mfg SS console path
INIT C700 Get manufacturing defaults
INIT C740 Initialize a non-primary boot path
INIT C750 Execute entry test for a non-primary boot path
INIT C780 Loading IPL from a non-primary boot path
INIT C7F0 An error occurred reading IPL
INIT C7F1 LIF file address is not 2K byte aligned or it is zero
INIT C7F2 LIF file not present on media, bad magic
INIT C7F3 LIF file is not a multiple of 2K bytes, is zero, or is greater than 256K bytes
INIT C7F4 LIF file entry point is not word aligned or is greater than or equal to the size
INIT C7F8 The arithmetic sum of the words in IPL <> 0
INIT C7FF Branching to IPL from a non-primary boot device
INIT CB00 Transfer Of Control initiated
WARN C7F0 Error reading IPL
WARN C7F1 LIF file address is not 2K byte aligned or it is zero
WARN C7F2 LIF file not present on media
WARN C7F3 LIF file is not a multiple of 2K bytes, is zero, or is greater than 256K bytes
WARN C7F4 LIF file entry point is not word-aligned or is >= the size of the file
WARN C7F8 IPL checksum error.
WARN CB01 No Operating System TOC vector found
WARN CB02 Invalid OS TOC vector
WARN CB03 Invalid OS TOC code
WARN CB04 Invalid OS TOC code length
WARN CB05 Invalid checksum for OS TOC code
WARN CB0A Previous TOC PIM logged, current TOC PIM data is lost
INIT CB0B Branching to OS TOC handler
WARN CB0C Branch to OS TOC failed
WARN CB10 *LPMC handling initiated
WARN CB15 Central bus LPMC error
INIT CB1B Branching to OS_LPMC handler
FLT CB1F Branching to OS LPMC failed
Table 4-17. PDC Initialization Codes (Continued)
Ostat Code Description
To Next Page
Loading...
