4-28 Display Codes
Internal Modem Error Codes
Modem Error: 100
Error Message:
***ERROR - unable to access the internal modem port. (MODMERR100)
Cause: 1. The Core I/O board is defective.
Action: Replace the Core I/O board.
Cause: 2. Port 7 of the Core I/O is not mounted on the dev directory.
Action: Use SAM to mount the Core I/O board on the dev directory.
Modem Error: 104
Error Message:
***ERROR - Unsupported modem connection to port 7 of CAPMUX board.
(MODMERR 104)
Cause: This utility only supports the MT1432 modem.
Action: Replace the existing modem with an MT1432 modem.
Modem Error: 108
Error Message:
***ERROR - Unable to communicate with the internal modem (MODMERR108)
Cause: The modem is defective or not installed properly.
Action: Check modem installation or replace modem.
Modem Error: 112
Error Message:
***ERROR - Unable to communicate with the modem (MODMERR112)
Cause: The modem port or modem is not properly configured.
Action: Run the port configuration test to check for proper configuration.
Modem Error: 116
Error Message:
***ERROR - EPROM checksum test failed (MODMERR116)
Cause: The modem is defective.
Action: Replace the modem.
Modem Error: 120
Error Message:
***ERROR - RAM check test failed (MODMERR120)
Cause: The modem is defective.
Action: Replace the modem.
To Next Page
Loading...
