SCSI and I/O 8-7
Common Problems
Common Problems in the Field:
• Maximum cable length exceeded.
• Improper Termination
• More than 1 device at the same address
• Damaged connector pins on High-Density cables.
Cable and Terminator Part Numbers
Tables 8-3 through 8-9 list all associated cables and terminators.
Table 8-3 50 Pin Low Density
Part
Number
Product
Number
Description
8120-5158 92222A Bail to Bail (M/M) 0.5 m
8120-4998 92222B Bail to Bail (M/M) 1.0 m
8120-5159 92222C Bail to Bail (M/M) 2.0 m
5063-1212 C2927A Bail to Bail (M/M) 3.0 m
5063-1213 C2928A Bail to Bail (M/M) 5.0 m
8120-5160 92222D Bail to Bail (M/F) 1.0 m
8120-5519 C2900A Bail to Bail (M/F) 3.0 m
8120-5520 C2901A Bail to Bail (M/F) 5.0 m
8120-5521 C2902A Bail to Bail (M/F) 10.0 m
8120-5522 C2903A Bail to Bail (M/F) 20.0 m
8120-5363 K2284 Bail to Thumb Screw 1.0 m
8120-5647 K2283 Bail to Thumb Screw 1.5 m
013045-005 K2207 Thumb Screw to Thumb Screw 0.5 m
013045-010 K2208 Thumb Screw to Thumb Screw 2.4 m
013045-009 K2209 Thumb Screw to Thumb Screw 1.5 m
013045-004 K2210 Thumb Screw to Thumb Screw 0.9 m
013045-011 K2211 Thumb Screw to Thumb Screw 3.0 m
Table 8-4 50 Pin Low Density to High Density
Part
Number
Product
Number
Description
5062-3384 Bail to Thumb Screw 0.5 m
5062-3383 K2296 Bail to Thumb Screw 1.0 m
5062-3388 K2297 Bail to Thumb Screw 1.5 m
5062-3386 Bail to Thumb Screw 2.0 m
5063-1218 Bail to Thumb Screw 2.5 m
To Next Page
Loading...
