8-52 SCSI and I/O
Specifications
• Integrated F/W SCSI Differential Controller
• 16 bit parallel data transfers
• Asynchronous and Synchronous Data transfer protocol
• Downloadable Firmware
• Selectable sector sizes (Default 512 bytes/sector)
• 264-bit ECC (Error Correcting Code) allowing for correction of up to 15 byte per block.
• Protected against data corruption from power off and unrecoverable data during block relocations.
• Sealed Head/Disk Assembly
• Dedicated head landing zone
• Automatic shipping lock
• Automatic thermal compensation
• Self-Test performed at power on
• Synchronous spindle capability
• 512 K byte data buffer
• Formatted data capacity limited to the same as the HP C2247A = 1052.09 Mbyte
(Actual vendor formatted data capacity = 1070 Mbyte)
• Eight spare sectors per cylinder
• 5400 RPM Spindle Speed
• Average latency = 5.6 ms
• 500,000 hour MTBF
• No preventative maintenance or adjustments required
• Low power consumption
• Inquiry Vendor Identification string = DEC
• Inquiry Product Identification string = DSP3170LSW
• Inquiry Product Revision Level string = HPMO (Multiuser first release)
(441I Workstation first release not supported)
To Next Page
Loading...
