EasyManua.ls Logo

HP 3000 9x9KS - Specifications

HP 3000 9x9KS
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-46 SCSI and I/O
Specifications
Integrated F/W SCSI Differential Controller
16 bit parallel data transfers
Asynchronous and Synchronous Data transfer protocol
Downloadable Firmware
Selectable sector sizes (Default 512 bytes/sector)
96 bit Reed-Solomon error correcting code
Sealed Head/Disk Assembly
Dedicated head landing zone
Automatic shipping lock
Automatic thermal compensation
Self-Test performed at power on
Synchronous spindle capability
256 K byte data buffer
Formatted data capacity limited to the same as the HP A2445A = 1052.09 Mbyte
(Actual vendor formatted data capacity = 1055.28 Mbyte)
Nine spare sectors per cylinder
5411 RPM Spindle Speed
Average latency = 5.54 ms
Command Queuing of up to 64 commands per initiator
500,000 hour MTBF
No preventative maintenance or adjustments required
Low power consumption
Inquiry Vendor Identification string = SEAGATE
Inquiry Product Identification string = ST31200W
Inquiry Product Revision Level string = HPM0 Multiuser first release
(8718 Workstation first release not supported)

Table of Contents

Other manuals for HP 3000 9x9KS

Related product manuals