SCSI and I/O 8-97
Preventative Maintenance
There is no preventative maintenance required for this product
Troubleshooting
This product is considered a single FRU and is replaced as a complete assembly.
Drive Status Light
1. After Drawer is closed:
Light OFF after short blinking sequence = Drive Ready or Stand-by.
Light ON = No disk present.
Light Blinking at 3.2 second interval = Cleaning of disk or optics required.
2. While Playing an Audio Track:
Light Blinking at 1.6 second interval
3. When Accessing Data:
Light Blinking at 0.2 second interval.
Internal Drive Logs
Available from interactive section of diagnostic.
Exchange Part Number
The exchange part number is: A1658-69002
Diagnostics
• SCSICD
• IOMAP
• SYSMAP
Parts and Accessories
CD-ROM Caddy = C2293-8000
To Next Page
Loading...
