Display Codes 4-23
Major Code Category D
Table 4-20. HP-UX System Initialization Codes
Code Description
CEE0 Kernel was loaded and initialization has begun
CEF0 Kernel has entered main
CEF2 Kernel is about to configure the I/O system
CEF4 Kernel is about to mount the root file system
CEF6 Kernel is about to set up the page-out demon
CEF8 Kernel is about to start the initialization process
Table 4-21. MPE/iX System Initialization Codes
Code Description
CF00 Entering launch
CF02 Mapped system state
CF04 Allocating memory
CF08 Backing out into Genesis
CF0A Entering Genesis
CF30 Initializing Genesis completed
CF40 Initializing resident kernel completed
CF50 Initializing non-resident kernel completed
CF60 CM SL binding completed
CF70 Configuring system I/O completed
CF80 System volume initialized and mounted
CF90 Initializing CM OS completed
Table 4-22. HP-UX System Shutdown Codes
Code Description
D000 Shutdown begun, boot () has been entered
D004 Transfer of Control (TOC) core dump begun
D010 High priority machine check (HPMC) core dump begun
D400 Shutdown in progress, returned from update (), about to wait for buffers to
be flushed
To Next Page
Loading...
