HP 3000 9x9KS - Major Code Category 2

4-6 Display Codes
Major Code Category 2
FLT 1xCE CPU was stopped via PDC_PROC call
FLT 1xCF Slave halted when selftest returned a negative code
FLT 1xDA *Bad CPU MID
FLT 1xDF Monarch failed dual-issue test
FLT 1xFF Monarch Selftest returned a failure
Table 4-5. Cache (Selftests and Diagnostics) Codes
Ostat Code
Description
(Where x = CPU number)
Descriptions preceded by an asterisk are applicable only for the following
systems: HP 9000 K250/K260/K450/K460/Kx70, HP VISUAL-IZE K260-
EG/K460-EG/K460-XP, and HP 3000 979KS.
TEST 2x00 Starting instruction cache address line selftest
TEST 2x10 Starting instruction cache data line selftest
TEST 2x10 *Starting instruction cache address line selftest
TEST 2x1F/C/8/4 Icache Address line stest forward progress
TEST 2x20 Starting instruction cache RAM selftest
TEST 2x21/2/3 Icache RAM stest forward progress indicator
TEST 2x30 Starting instruction cache tag selftest
TEST 2040 Starting cache ierr selftest
TEST 2x50 Starting data cache address line selftest
TEST 2x60 Starting data cache data line selftest
TEST 2x60 *Starting data cache RAM selftest
TEST 2x70 Starting data cache RAM selftest
TEST 2x70 *Starting data cache DTAG selftest
TEST 2x80 Starting data cache tag selftest
TEST 2x90 Starting Cache derr selftest
TEST 2xA0 Starting PM cache selftest
TEST 2xA1 Starting PM cache RAM selftest
TEST 2xA3 Starting PM cache pointer selftest
TEST 2xA7 Starting PM cache CAM selftest
FLT 2x01 - 2x03 Instruction cache address line fault
FLT 2x11 - 2x12 Instruction cache data line fault
FLT 2x11 - 2x12 *Instruction cache address line fault
FLT 2x21 - 2x23 Instruction cache RAM fault
FLT 2x25 - 2x26 Instruction cache RAM load error
Table 4-4. Major Code 1, Boot Codes
Ostat Code
Description (
Where x = CPU number)