Display Codes 4-5
FLT 1x8B - 1x8D CPU external interrupt selftest fault
FLT 1x8E - 1x93 CPU interval time selftest fault
FLT 1x94 - 1x97 CPU shadow register selftest fault
FLT 1x98 - 1x99 CPU diagnostics register fault
FLT 1xA0 CPU COPROC selftest failure
FLT 1xA1 COPROC register selftest failure
FLT 1xA2 COPROC instruction selftest failure
FLT 1xA3 COPROC traps selftest failure
FLT 1xA4 COPROC miscellareous selftest failure
FLT 1xA5 COPROC Bypass selftest failure
FLT 10B0 TLB initialization fault
FLT 10B1 TLB RAM selftest error
FLT 10B2 TLB translation selftest error
Table 4-4. Major Code 1, Boot Codes
Ostat Code Description (
Where x = CPU number)
TEST 1xBC Test for matching CPU speeds
INIT 1xBC Finished test for CPU clock speed
INIT 1xCA Initializing runway CPU arbitration
INIT 1xFC Synchronizing CPUs
WARN 1xBC Skipped test for CPU clock speed
WARN 1xC0 *PDC processors could not be loaded in memory
WARN 1xCD CPU was deconfigured
WARN 1xCE CPU was extinguished due to call to PDC_PROC
WARN 1xDy Monarch (x) deconfigured slave (y)
WARN 1xEF Selftest returned a warning
WARN 1xFy Monarch(x) has stopped a non-respondinging slave(y)
FLT 1xBA Bad Monarch CPU
FLT 1xBB Bad CPU number. CPU number not 0, 1, 2, or 3.
FLT 1xBC Failed test for matching CPU speeds (100MHz mixed with 120MHz)
FLT 1xBD CPUs not installed in sequential order.
FLT 1xBE *Missing load board
FLT 1xBF Slave CPU halted due to catastrophic boot failure
FLT 1xCB Mismatched CPU revisions
FLT 1xCC Mismatched cache sizes
Table 4-3. Major Code 1, Selftests and Diagnostics (Continued)
Ostat Code
Description
(Where x = CPU number)
Descriptions preceded by an asterisk are applicable only for
the following systems: HP 9000 K250/K260/K450/K460/
Kx70, HP VISUAL-IZE K260-EG/K460-EG/K460-XP, and
HP 3000 979KS.
To Next Page
Loading...
