SCSI and I/O 8-109
Preventative Maintenance
There is no preventative maintenance required for this product
Troubleshooting
This product is considered a single FRU and is replaced as a complete assembly.
Drive Status Light
1. After Drawer is closed:
Light OFF after short blinking sequence = Drive Ready or Stand-by.
Light ON = No disk present.
Light Blinking at 3.2 second interval = Cleaning of disk or optics required.
2. While Playing an Audio Track:
Light Blinking at 1.6 second interval
3. When Accessing Data:
Light Steady.
Internal Drive Logs
Available from interactive section of diagnostic.
Exchange Part Number
There is no exchange part number for this product.
Vertical Mount Unloading
1. Wait for CD ROM activity to stop.
2. Press the Eject Button (see Figure 8-61). The CD tray will slide
out.
3. Snap the top retaining tabs (A, B) away from the top of the CD.
4. Remove the CD from the tray.
CD Loading/Unloading in the Vertical Mount Position
To Next Page
Loading...
