4-30 Display Codes
Modem Error: 148
Error Message:
***ERROR - Unable to communicate with the modem, please run port configuration
test (MODMERR148)
Cause: The modem or modem port is not properly configured.
Action: Run the port configuration test to check for proper configuration.
Modem Error: 152
Error Message:
***ERROR - Required a remote unit for test (MODMERR152)
Cause: This is a remote test, it needs a remote unit to execute.
Action: Connect to a remote unit prior to initiating this test.
Modem Error: 156
Error Message:
***ERROR - Unable to communicate with the remote unit by number ___
(MODMERR156)
Cause: Incorrect number for the remote unit.
Action: Acquire the correct number for the remote unit.
Modem Error: 160
Error Message:
***ERROR - The modem remote digital loopback test failed. Character sent
over___ and received___ (MODMERR160)
Cause: The internal modem is defective, if the remote unit is known good.
Action: Replace the modem.
Modem Error: 164
Error Message:
***ERROR - The modem remote digital loopback test failed (MODMERR164)
Cause: The modem is defective.
Action: Replace the modem.
Modem Error: 168
Error Message:
***ERROR - The correct modem (MT1432) is not installed. This mode only supports
the MT1432 modem (MODMERR168)
Cause: The installed modem is not supported by this utility.
Action: Replace the installed modem with an MT1432.
To Next Page
Loading...
