HP 3000 9x9KS - Page 295

SCSI and I/O 8-107
CD Loading/Unloading in the Vertical Mount Position
Vertical Mount Loading
1. Press the Eject Button (refer to Figure 8-61). The CD will slide
out of the tray. Note the position of the top retaining tabs (A, B)
and bottom retaining tabs (C, D).
2. Snap the bottom retaining tabs (C, D) toward the center of the
tray to prevent the CD from slipping out.
3. Snap the top retaining tabs (A, B) away from the center of the
CD tray.