HP 4155A Programmer's Guide

HP 4155A/4156A SCPI Programming
Programming: Print/Plot Operation
To Output Setup Data to Printer/Plotter
1. If you want to output print/plot comment, enter comment by using
:HCOPy:ITEM:LABel:TEXT command.
2. Specify the range of setup data to print/plot by sending :HCOPy:OPAGe
command.
 To print/plot present page setup data, send :HCOPy:OPAGe CURRent
 To print/plot present page group setup data, send :HCOPy:OPAGe GROup
 To print/plot all setup data, send :HCOPy:OPAGe ALL
3. Display the page that you want to print/plot by using the appropriate
command:
Page Command
CHANNELS: CHANNEL DEFINITION :PAGE:CHAN
CHANNELS: USER FUNCTION DEFINITION :PAGE:CHAN:UFUN
CHANNELS: USER VARIABLE DEFINITION :PAGE:CHAN:UVAR
MEASURE: SWEEP SETUP :PAGE:MEAS
MEASURE: SAMPLING SETUP :PAGE:MEAS:SAMP
MEASURE: PGU SETUP :PAGE:MEAS:PGUS
MEASURE: MEASURE SETUP :PAGE:MEAS:MSET
MEASURE: OUTPUT SEQUENCE :PAGE:MEAS:OSEQ
DISPLAY: DISPLAY SETUP :PAGE:DISP
DISPLAY: ANALYSIS SETUP :PAGE:DISP:ANAL
STRESS: CHANNEL DEFINITION :PAGE:STR
STRESS: STRESS SETUP :PAGE:STR:SET
STRESS: STRESS FORCE :PAGE:STR:FORC
4-33

HP 4155A Specifications

General

Brand	HP
Model	4155A
Category	Measuring Instruments
Language	English