HP 4155A Programmer's Guide

HP 4155A/4156A SCPI Programming
Programming: Print/Plot Operation
Line Number Description
10 Assigns I/O path to control HP 4155A/4156A from external computer.
20 Sets the HP-IB address of external computer. This will be necessary to
return Active Controller capability from HP 4155A/4156A back to the
external computer.
40 Resets HP 4155A/4156A
50 Species to pass Active Controller capability back to external computer
after printing is completed.
70 Loads measurement setup data from diskette le SWP.MES .
80 Species to not print the page number.
90 Denes a print/plot comment.
100 Selects HP-IB interface. If serial interface, change the parameter to ''SER''.
110 to 130 Species to print/plot the setup data of the MEASURE: SWEEP SETUP
page.
150 to 190 Sends print command and waits for Active Controller request from HP
4155A/4156A.
210 Passes Active Controller capability to HP 4155A/4156A, then HP
4155A/4156A starts printing.
230 to 250 Waits until printing is complete.
4-35

HP 4155A Specifications

General

Brand	HP
Model	4155A
Category	Measuring Instruments
Language	English