Model 5340A
WARNING
115 VOLTS AC AND 175 VOLTS DC ARE USED IN THIS INSTRUMENT.
SCRIBED HEREIN ARE PERFORMED WITH POWER SUPPLIED TO THE
INSTRUMENT WHILE PROTECTIVE COVERS ARE REMOVED. EXERCISE
EXTREME CARE WHEN PERFORMING THESE OPERATIONS. LINE
VOLTAGE IS ALWAYS PRESENT ON TERMINALS INCLUDING THE
POWER INPUT CONNECTOR, FUSE HOLDER, POWER SWITCH, ETC. IN
ADDITION, WHEN THE INSTRUMENT IS ON, ENERGY AVAILABLE AT
MANY POINTS MAY RESULT IN PERSONAL INJURY OR DEATH WHEN
CONTACTED
.
SOME
OF
THE MAINTENANCE AND SERVICING OPERATIONS DE
-
WARNING
THIS INSTRUMENT IS SUPPLIED WITH A THREE
-
WIRE POWER CABLE.
THE CENTER THIRD WIRE IS INTENDED TO CONNECT THE INSTRU
-
MENT CHASSIS
TO
EARTH GROUND WHEN USED WITH A PROPERLY
WIRED THREE
-
CONDUCTOR OUTLET. REFER TO SECTION I1 FOR
DETAILS
OF
POWER CONNECTION. IMPROPERLY GROUNDED EQUIP
-
MENT CONFIGURATIONS
MAY RESULT IN HAZARDOUS POTENTIALS
BETWEEN THE CHASSIS
OF
TWO OR MORE INSTRUMENTS OR EARTH
GROUND.
INPUT CIRCUITS AT THE
50
OHM INPUT CONNECTOR CAN BE DE
-
PARAGRAPH
3
-
21
REGARDING ACCEPTABLE INPUT LEVELS.
STROYED WITH INPUT LEVELS EXCEEDING
1
WATT.
PLEASE READ
,
,
',
!
:i
,'i
I
ix
To Next Page
Loading...
Need help?
General
