HP 5340A - Input Cable Considerations; Controls, Indicators, and Connectors; Operating Procedures

Model 5340A
Operation
3 - 23. INPUT CABLE CONSIDERATIONS
3 - 24.
Consideration should be given to input cable losses at higher frequencies. For example, a
6
- foot RG-214/U coaxial cabIe has about 15 dB loss at 18 GHz. Such losses should be taken into
consideration along with the sensitivity specifications given in Table
1 - 3.
3
- 25. For low capacity input measurements, a 1O:l low capacity oscilloscope probe (HP 10004A)
can be used on the BNC connector for frequency inputs up to approximately 100 MHz.
3 - 26. CONTROLS, INDICATORS, AND CONNECTORS
3 - 27.
describes the rear panel connectors and controls.
Figure
3 - 3 describes the front panel controls, indicators, and connectors.
Figure
3 - 4
3 - 28. OPERATING PROCEDURES
3 - 29.
Figure 3 - 6.
Figure 3 - 5 illustrates the operating procedures. Self check procedures are givei
3 - 4